Cobra Brushless Multirotor Motors offer performance and value for Your RC Models. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all sides, with separate compartments to protect the motor and accessory pack.
The Cobra CM-2208 series motors have a 3.0mm motor shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Since these motors are typically soldered directly to the speed controller to save weight, the 2208 motors come without bullet connectors and feature extended pre-tinned motor leads that are 10 inches (254mm) long. These motors also have 3mm threaded holes in a 16x19mm pattern on the back plate for easy installation on your model.
The CM-2208 series motors feature an integrated 5mm threaded motor shaft which eliminates the chance of having a prop adapter spin off in flight. The included prop washer and nylon insert prop nut provides a solid attachment for your propellers that will not loosen up and slip during use.
Included with every Cobra CM-2208 Series Motor is a complete accessory package which contains the following items:
● Four M3x5mm Motor Mount Screws
● Four M3 Flat Washers
● Machined Aluminum Prop Washer
● Locking Prop Nut with Nylon Insert
Click here for the Cobra CM-2208/20 Propeller Data Chart
Motor Performance Graphs
|Cobra CM-2208/20 Motor Specifications|
| Stator Diameter|| 22.0 mm (0.866 in)|
| Stator Thickness|| 8.0 mm (0.315 in)|
| Number of Stator Slots|| 12|
| Number of Magnet Poles|| 14|
| Motor Wind|| 20 Turn Delta|
| Motor Kv Value|| 2000 RPM per Volt|
| No Load Current (Io)|| 0.77 Amps @ 10 Volts|
| Motor Resistance (Rm) per Phase|| 0.114 Ohms|
| Motor Resistance (Rm) Phase to Phase|| 0.076 Ohms|
| Maximum Continuous Current|| 20 Amps|
| Max Continuous Power (2-cell Li-Po)|| 150 Watts|
| Max Continuous Power (3-cell Li-Po)|| 220 Watts|
| Max Continuous Power (4-cell Li-Po)|| 300 Watts|
| Motor Weight|| 44.2 grams (1.56 oz.)|
| Outside Diameter|| 27.7 mm (1.091 in.)|
| Motor Shaft Diameter|| 3.00 mm (0.118 in.)|
| Prop Shaft Diameter|| 5.00 mm (0.197 in.)|
| Motor Body Length|| 24.0 mm (0.945 in.)|
| Overall Shaft Length|| 45.2 mm (1.780 in.)|
| Motor Timing|| 5-10 degrees|
| PWM Frequency|| 8 KHz|
The following downloadable PDF files show the performance data curves of the Cobra CM-2208/20 motor, over its entire throttle range, with a variety of propellers. These graphs can be downloaded and printed to use as a
reference for calculating power requirements at specific thrust levels, and enable the user to calculate flight times, current draw and other motor parameters.
2-Cell Li-Po Power
Cobra CM-2208/20 Performance Data with APC 7x4-SF prop on 2S Li-Po
Cobra CM-2208/20 Performance Data with APC 7x5-E prop on 2S Li-Po
3-Cell Li-Po Power
Cobra CM-2208/20 Performance Data with APC 6x4-E prop on 3S Li-Po
Cobra CM-2208/20 Performance Data with FC 6x4.5 prop on 3S Li-Po
Performance Graph Instructions
This downloadable PDF file shows the step by step process to use for interpreting the data shown in the Motor Performance Graphs. By following this procedure, you can determine how to select a proper motor for a Multirotor aircraft, as well as calculate required power levels, determine overall prop efficiency and calculate expected flight times based on the battery size that is used. This document can be printed out and saved as a valuable reference tool to keep in your workshop for future use as well.
Motor Performance Graph Instructions
Items Included in Hardware Package
NOTE: Cross Mounts are NOT included with any multirotor motors.
Cobra Motor Packaging
*Please observe the motor specifications properly. This will determine the correct size ESC required for proper operation*
*Motors that have failed\burned running on an incorrect ESC size will void warranty*
For more information about this product and the rest of the Cobra Motors product line, please check out the Cobra Brushless Motors web site.