The Cobra Champion series motors are the most powerful versions ever made for FPV Racing! A completely new design that increases cooling and efficiency, these motors provide the ultimate power for your FPV Racing Quads. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Since these motors are typically soldered directly to the speed controller to save weight, the CP-1407 motors come without bullet connectors ,and feature extended pre-tinned motor leads that are 3 inches (75mm) long. These motors also have 2mm threaded holes in a 12x12mm pattern on the back plate for easy installation on your model.
The CP-1407 series motors are designed for the Micro size FPV racing quads and feature an integrated 5mm threaded motor shaft which eliminates the chance of having a prop adapter spin off in flight. The included nylon insert prop nut, which has an integrated prop washer, provides a solid attachment for your propellers that will not loosen up and slip during use.
Also included with every Cobra CP-1407 Series Motor is an accessory pack, which includes everything you need to securely mount the motor to your quad frame, and to mount the prop to the motor.
The hardware kit contains the following items:
● Four M2 x 5mm Socket Head Motor Mount Screws
● One 1.3mm Hex Key Wrench
● One Locking Prop Nut with Nylon Insert
*Please observe the motor specifications properly. This will determine the correct size ESC required for proper operation*
*Motors do not come with replacement parts!*
*Motors that have failed\burned running on an incorrect ESC size will void warranty*
|Cobra CP-1407/4100 Motor Specifications|
| Stator Diameter|| 14.0 mm (0.551 in)|
| Stator Thickness|| 7.0 mm (0.276 in)|
| Number of Stator Slots|| 9|
| Number of Magnet Poles|| 12|
| Motor Kv Value|| 4100 RPM per Volt|
| No Load Current (Io)|| 0.52 Amps @ 10 Volts|
| Motor Resistance (Rm) per Phase|| 0.043 Ohms|
| Motor Resistance (Rm) Phase to Phase|| 0.035 Ohms|
| Maximum Continuous Current|| 19 Amps|
| Max Continuous Power (3-cell Li-Po)|| 210 Watts|
| Max Continuous Power (4-cell Li-Po)|| 280 Watts|
| Motor Weight (Motor Only)|| 14.5 grams (0.51 oz.)|
| Motor Weight (With leads and Prop Nut)|| 17.0 grams (0.60 oz.)|
| Outside Diameter|| 18.5 mm (0.728 in.)|
| Motor Shaft Diameter|| 2.00 mm (0.079 in.)|
| Prop Shaft Diameter|| 5.00 mm (0.197 in.)|
| Motor Body Length|| 16.0 mm (0.630 in.)|
| Overall Shaft Length|| 28.9 mm (1.138 in.)|
| Motor Timing|| 5-10 degrees|
| PWM Frequency|| 8 KHz|
For more information about this product and the rest of the Cobra Motors product line, please check out the Cobra Brushless Motors web site.