Scorpion HK-3026-1900 V2 Brushless Motor, Kv=1900

Write A Review

Scorpion HK-3026-1900 V2 Brushless Motor, Kv=1900

Out Of Stock
$109.99

Description

The Scorpion HK-3026 motors have been developed for the newer 500 and 550 class electric helicopters that are becoming so popular. These motors are designed to provide all the power that you can use, while still maintaining excellent efficiency and cool running characteristics.

Scorpion HK Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are N-50EH style, which are rated for operation at 200 degrees C (392 F), making a motor that is virtually impossible to burn up in normal use.

All Scorpion HK-3026 series motors come with 4mm male Bullet style connectors already attached, and include a hardware package that contains 3 matching female Bullet connectors for your speed controller with matching heat shrink tubing. Since the HK series motors are primarily designed for Helicopter and Ducted Fan use, they do not include a prop adapter. If you intend on running a prop on this motor, you will need to purchase a prop adapter for a 5mm shaft.

Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

Use the Scorpion Motor Bearing Lubrication Kit for maintaining the bearings in your helicopter motor. To view this product, please check out the Bearing Lubrication Kit.

If you need mounting screws for this motor, please check out our selection of Motor Mounting Screws.

For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!

Specifications

Scorpion HK-3026-1900 V2 Motor Specifications
 Stator Diameter 30.0 mm (1.181 in)
 Stator Thickness 26.0 mm (1.024 in)
 Number of Stator Slots 9
 Number of Magnet Poles 6
 Motor Wind 8-Turn Delta
 Motor Wire 23-Strand 0.25mm
 Motor Kv Value 1900 RPM per Volt
 No Load Current (Io) 1.98 Amps @ 6 Volts
 Motor Resistance (Rm) per Phase 0.012 Ohms
 Maximum Continuous Current 80 Amps
 Max Continuous Power (6-cell Li-Po) 1780 Watts
 Motor Weight 193 grams (6.80 oz.)
 Outside Diameter 37.5 mm (1.476 in.)
 Shaft Diameter 5.00 mm (0.197 in.)
 Motor Body Length 48.4 mm (1.906 in.)
 Overall Shaft Length 74.2 mm (2.921 in.)
 Peak Current 120 Amps (2 seconds)
 Peak Power 2660 Watts (2 seconds)
 Motor Timing 5 to 15 degrees
 Drive Frequency 8 HKz


Weight including packaging

607g






Click here to download a PDF Copy of the HK-3026 Motor Drawing.

Product Questions

No questions yet. Be the first to ask the question!

Write A Review

Only registered users can write reviews. Please log in or register

Customer Reviews

This product has not been reviewed. You could write the first review.