Scorpion HK Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. All Scorpion motors are built from high quality Aluminum and Steel alloys to exacting tolerances on state of the art CNC machines for the highest level of fit and finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are all hand-wound to insure the highest copper fill rate with wire that is rated at 180 degrees C (356 F), and high voltage tested to insure that no shorts are present. All the metal motor parts are electro-coated in a beautiful black and gold finish so the motors look as good as they perform. The high temperature magnets used in Scorpion Motors are designed to give top performance in the most demanding applications.
This particular motor is specifically designed for the new smaller electric helicopters such as the T-Rex 250, and features a 2.5mm output shaft that fits the stock Trex 250 pinion gears.
The Scorpion HK-2206 motors come with 3.5mm male bullet connectors already soldered on to the motor leads, and also include 3 matching female bullet connectors for your speed controller, 3 pieces of heat shrink tubing and a set of 2.5mm mounting screws.
Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.
Included in the Box
|Scorpion HK-2206-3900 Motor Specifications|
| Stator Diameter|| 22.0 mm (0.866 in)|
| Stator Thickness|| 6.0 mm (0.236 in)|
| Number of Stator Slots|| 9|
| Number of Magnet Poles|| 6|
| Motor Wind|| 24 Turn Delta|
| Motor Kv Value|| 3900 RPM per Volt|
| No Load Current (Io)|| 0.83 Amps @ 6 Volts|
| Motor Resistance (Rm) per Phase|| 0.096 Ohms|
| Motor Resistance (Rm) Phase to Phase|| 0.064 Ohms|
| Maximum Continuous Current|| 14 Amps|
| Max Continuous Power (2-cell Li-Po)|| 100 Watts|
| Max Continuous Power (3-cell Li-Po)|| 150 Watts|
| Motor Weight|| 31.6 grams (1.113 oz.)|
| Outside Diameter|| 27.9 mm (1.098 in.)|
| Shaft Diameter|| 2.50 mm (0.117 in.)|
| Motor Body Length|| 22.6 mm (0.890 in.)|
| Overall Shaft Length|| 32.6 mm (1.283 in.)|
1 x Scorpion HK-2206-3900KV Motor
3 x Female Connectors
3 x Heat Shrink
4 x M2.5 Screws
Weight including packaging
Click here for a PDF CAD drawing the Scorpion HK-2206-3900 Motor