Scorpion HK-4525-520-XL Ultimate Brushless Motor, Kv=520

Write A Review

Scorpion HK-4525-520-XL Ultimate Brushless Motor, Kv=520

Out Of Stock


The Scorpion HK-45 series XL motor has an extended motor shaft (for the Gaui X7) and is designed for use on 700 class helicopters running on 12-cell Li-Po power. The overall shaft length increases from 91.5mm (stock) to 113mm long, with 55mm sticking out past the mounting surface. This motor represents the most technologically advanced power source ever offered for a 700 class electric helicopter and also produces 20% more torque than the Scorpion popular HK4035 series motors that exceed 89% efficiency. This new 4525-520-XL ULTIMATE motor has a new flux design, it has a lower internal resistance and a higher efficiency. The continued power rating is the same as the 4525 Limited Edition but it has a higher peak rating.

Each of the new HK-4525-520kv XL ULTIMATE motors are wound with a single strand of 1.4mm wire for the highest possible efficiency. This motor is capable of running continuously at an input power of 4450 watts at 100 amps, and can handle peak inputs of 10200 watts and 230 amps for two seconds

Scorpion Competition Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold Electro-Coated to provide a beautiful, long-lasting finish. The stators are made with 0.2mm lamination's to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are custom manufactured to be able to withstand high temperatures, making a motor that is virtually impossible to burn up in normal use.

Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

*This motor is using 30mm bolt spacing on the mounting with M4 screw holes


Scorpion HK-4525-520-XL Ultimate Motor Specifications
 Stator Diameter 45 mm (1.77 in)
 Stator Thickness 25 mm (0.98 in)
 Number of Stator Slots 12
 Number of Magnet Poles 10
 Motor Wind 5-6 Turn Delta
 Motor Wire 1-Strand 1.4mm
 Motor Kv Value 520 RPM per Volt
 No Load Current (Io) 1.75 Amps @ 10 Volts
 Motor Resistance (Rm) per Phase 0.012 Ohms
 Maximum Continuous Current 100 Amps
 Max Continuous Power (8-cell Li-Po) 4450 Watts
 Motor Weight 487 grams (17.17 oz.)
 Outside Diameter 56.7 mm (2.23 in.)
 Shaft Diameter 5.98 mm (0.24 in.)
 Motor Body Length 53.4 mm (2.10 in.)
 Overall Shaft Length 113 mm (4.45 in.)
 Max Li-Po Cell 12s
 Peak Current 230 Amps (2 seconds)
 Peak Continuous Power 10,200 Watts (2 seconds)
 Motor Timing 5 to 15 degrees
 Drive Frequency 8 KHz

Included in the box

1 x Scorpion HK-4525-520KV XL Motor

* Gold connects are not soldered nor included.

Weight including packaging


View Scorpion HK-4525-520KV XL - ULTIMATE Full Dimension

Product Questions

bonjour: quelle est la longueur de l'arbre en sortie moteur. merci

Write A Review

Only registered users can write reviews. Please log in or register

Customer Reviews

This product has not been reviewed. You could write the first review.