Scorpion HKII-2213-20 Brushless Motor, Kv=2640

Write A Review

Scorpion HKII-2213-20 Brushless Helicopter Motor

In Stock
$41.99

Description

Scorpion HKII Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. All Scorpion motors are built from high quality Aluminum and Steel alloys to exacting tolerances on state of the art CNC machines for the highest level of fit and finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are all hand-wound to insure the highest copper fill rate with wire that is rated at 180 degrees C (356 F), and high voltage tested to insure that no shorts are present. All the metal motor parts are electro-coated in a beautiful black and gold finish so the motors look as good as they perform. The high temperature magnets used in Scorpion Motors are designed to give top performance in the most demanding applications.

The main shaft of these motors is 4mm in diameter which increases the strength of the shaft, and allows the use of larger motor bearings. The end of the motor shaft is precision ground down to 3.17mm (1/8 inch) to fit the standard size pinion gears that are used on this size motor.

The Scorpion HKII-2213 motors come with 3.5mm male bullet connectors already soldered on to the motor leads, and also include 3 matching female bullet connectors for your speed controller, 3 pieces of heat shrink tubing and 2 mounting screws.

Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.


Scorpion HKII-2213-20 Motor Specifications
Stator Diameter22.0 mm (0.866 in)
Stator Thickness13.0 mm (0.512 in)
Number of Stator Slots9
Number of Magnet Poles6
Motor Wind20 Turn Delta
Motor Kv Value2640 RPM per Volt
No Load Current (Io)1.10 Amps @ 10 Volts
Motor Resistance (Rm) per Phase0.095 Ohms
Motor Resistance (Rm) Phase to Phase0.063 Ohms
Maximum Continuous Current26 Amps
Max Continuous Power (2-cell Li-Po)190 Watts
Max Continuous Power (3-cell Li-Po)290 Watts
Max Continuous Power (4-cell Li-Po)380 Watts
Motor Weight54.0 grams (1.83 oz.)
Outside Diameter27.9 mm (1.098 in.)
Shaft Diameter3.17 mm (0.125 in.)
Motor Body Length29.9 mm (1.177 in.)
Overall Shaft Length50.7 mm (1.996 in.)

Write A Review

Only registered users can write reviews. Please log in or register

Customer Reviews

This product has not been reviewed. You could write the first review.