Scorpion HK-2520-3500kv Motor (3.5mm shaft)

Write A Review

Scorpion HK-2520-3500kv Motor (3.5mm shaft)

In Stock
$79.99

Description

Scorpion HK-2520-3500 motor has been developed for the larger 450 class electric helicopters running on 3-cell Li-Po power such as the Trex 450 Dominator and Gaui X3. This motor is designed to provide all the power that you can use, while still maintaining excellent efficiency and cool running characteristics. The 3.5mm shaft is designed for the new generation 450 class electric helicopters.

Scorpion HK-Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold Electro-Coated to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are custom manufactured to be able to withstand high temperatures, making a motor that is virtually impossible to burn up in normal use.

Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!


Specifications

Scorpion HK-2520-3500kv Motor (3.5mm) Specifications
 Stator Diameter 25.0 mm (0.98 in)
 Stator Thickness 20.0 mm (0.79 in)
 Number of Stator Arms 12
 Number of Magnet Poles 10
 Motor Wind 3 Turn Delta
 Motor Wire 21-Strand 0.25mm
 Motor Kv Value 3500 RPM per Volt
 No Load Current (Io) 5.80 Amps @ 10 Volts
 Motor Resistance (Rm) per Phase 0.008 Ohms
 Maximum Continuous Current 55 Amps
 Max Continuous Power (3-cell Li-Po) 580 Watts
 Max Continuous Power (4-cell Li-Po) 770 Watts
 Motor Weight 104 grams (3.64 oz.)
 Outside Diameter 31.5 mm (1.24 in.)
 Shaft Diameter 3.5 mm (0.14 in.)
 Motor Body Length 39.6 mm (1.56 in.)
 Overall Shaft Length 57.5 mm (2.26 in.)
 Max LiPo Cell 4s
 Peak Current 75 Amps (2 seconds)
 Peak Continuous Power 1050 Watts (2 seconds)
 Motor Timing 5deg
 Drive Frequency 8kHz


Included in the Box

1 x Scorpion HK-2520-3500KV Motor
3 x Female Connectors
3 x Heat Shrink
4 x M3 Screws

Weight including packaging

215g


Full Dimension

View Scorpion HK-2520-3500Kv Motor (3.5mm shaft) Full Dimension

Product Questions

No questions yet. Be the first to ask the question!

Write A Review

Only registered users can write reviews. Please log in or register

Customer Reviews

This product has not been reviewed. You could write the first review.