Scorpion HK-3536-510Kv Brushless Motor, Kv=510

Write A Review

Scorpion HK-3536-510Kv Brushless Motor, Kv=510

In Stock


The Scorpion HK-3536-510 is THE motor that Trex 600 owners have been waiting for! This new motor is only 45mm in diameter, so it fits easily within the side frames of most 600 class helicopters without having to cut any clearance holes for the motor. Designed to run on 12 Li-Po cells, this motor can deliver 2900 watts of continuous power for the most demanding 3D applications. The new HK-3536-510 motor uses the same design features as the popular HKIII 40mm helicopter motors for increased cooling and high efficiency operation.

Scorpion HK-Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold Electro-Coated to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are custom manufactured to be able to withstand high temperatures, making a motor that is virtually impossible to burn up in normal use.

Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!


Scorpion HK-3536-510Kv Motor Specifications
 Stator Diameter 35 mm (1.38 in)
 Stator Thickness 36 mm (1.42 in)
 Number of Stator Arms 12
 Number of Magnet Poles 10
 Motor Wind 11 Turn Delta
 Motor Wire 16-Strand 0.25mm
 Motor Kv Value 510Kv RPM/Volt
 No Load Current (Io) 1.24 Amps
 Motor Resistance (Rm) per Phase 0.028 Ohms
 Maximum Continuous Current 70 Amps
 Max Continuous Power 2900 Watts
 Motor Weight 365 Grams (11.85oz)
 Outside Diameter 45.0 mm (11.85 in.)
 Shaft Diameter 5.98 mm (0.24 in.)
 Motor Body Length 61.5 mm (2.42 in.)
 Overall Shaft Length 98.0 mm (3.86 in.)
 Max Lipo Cell 12s
 Max Peak Current 100 Amps (2 seconds)
 Max Peak Power 4150 Watts (2 seconds)
 Motor Timing 5deg
 Drive Frequency 8kHz

Included in the Box

1 x Scorpion HK-3536-510KV Motor
3 x Female Connectors
3 x Heat Shrink
4 x M3 Screws

Weight including packaging


View the Scorpion HK-3536-510Kv Motor Full Dimension

Write A Review

Only registered users can write reviews. Please log in or register

Customer Reviews

This product has not been reviewed. You could write the first review.