Scorpion Tribunus 6-Cell 120A ESC (SBEC)

Write A Review

Tribunus 6S-120A ESC

Out Of Stock


After several years of development, the new Tribunus Series ESC's have arrived! This new generation of ESC is just what you need for your 550 to 600 size Electric Helicopter running on 6 Li-Po cells, or larger 60 to 90 size electric airplanes. With the new Tribunus series ESC's, programming has never been easier. These speed controllers can be programmed 3 different ways:

        1) With the USB V-Link II interface cable using a PC computer
        2) With an Android based phone or tablet using an OTG cable
        3) With the Mikado V-Control Radio.

The 6S-120A SBEC model features a built-in Switching Battery Eliminator Circuit that is adjustable from 5.1 to 8.3 volts, and is rated for 10 amps of continuous current with peaks of up to 20 amps! The heatsink on the top of the ESC is pre-drilled with M3 holes to fit a pair of 30mm cooling fans that allow the ESC to keep running cool, even in completely enclosed applications. In addition to soft-start capability, the ESC features an excellent built-in internal governor, and also supports an external governor.

For an introduction to the new Tribunus ESC's, please see the video below.

For complete set-up instructions for teh Tribunus 120A ESC, please see the video below.


Scorpion Tribunus 6-Cell 120 Amp ESC (SBEC) Specifications
 Weight (Without Connectors) 120 g (4.23oz)
 Max Continuous Current 120 Amps
 Peak Current (5 Sec.) 150 Amps
 Operating Voltage Range 11 to 26 Volts
 Li-Po Battery Range 3-6 Cells
 BEC Output Voltage 5.1V to 8.3V adjustable
 Max Continuous BEC Output 10 Amps @ 8.3 V
 Peak BEC Output 20 Amps/1s @ 8.3 V
 On Resistance 0.40 mOhms
 Size (in millimeters) 73.8 x 37.0 x 23.7
 Size (in inches) 2.90 x 1.45 x 0.92

Included in the box

1 - Diode Adapter Cable

Additional Information and Downloads

Scorpion Tribunus 6S-120A ESC Manual

Scorpion Tribunus Data Logger Program

Driver for Scorpion V-Link-II USB Programming Cable

How to build a Tribunus ESC Telemetry/Setup cable for use with Vbar NEO

How to build a Tribunus ESC Telemetry/Setup cable for use with Jeti

Weight including packaging


Write A Review

Only registered users can write reviews. Please log in or register

Customer Reviews

This product has not been reviewed. You could write the first review.