Aluminum Folding Prop Spinner, 35mm (1-3/8") Diameter for 4mm Motor Shafts
The 35mm spinners have a Spinner Cone that is 35mm (1-3/8 inches) in diameter with an overall length of 27.5mm (1.08 inches). The Center-to-Center distance between the prop attachment screws on the yoke is 38mm (1.50 inches), and the complete spinner assembly weighs 16.0 grams or 0.56 ounces.
These machined folding prop spinners feature a lightweight aluminum spinner cone with a machined aluminum yoke assembly. The yoke is held onto a smooth motor shaft with a compression-type collet. They are available in 5 different diameters with multiple shaft size options to fit a wide range of aircraft motors. These spinners are a very standard design and can be used with our GemFan folding blades as well as most other brands of blades that use a 8mm hub with a 3mm bore hole.
A pair of M3x12mm Phillips flat head screws are used to hold the prop blades to the yoke assembly, and a M2 Phillips flat head screw is used to hold the spinner cone in place onto the compression collet assembly.
The 35mm spinners have a Spinner Cone that is 35mm (1-3/8 inches) in diameter with an overall length of 27.5mm (1.08 inches). The Center-to-Center distance between the prop attachment screws on the yoke is 38mm (1.50 inches), and the complete spinner assembly weighs 16.0 grams or 0.56 ounces. This spinner includes a 4.0mm collet to fit motors with a 4mm smooth shaft.