BadAss Cross Mount for 23mm Series Motors
This is the standard aluminum cross mount that comes in the hardware kit with all BadAss 23mm motors. The four motor mounting holes are on a standard 16mm x 19mm mounting pattern, so in addition to fitting the BadAss 23mm motors, they will also fit a variety of other 22mm to 23mm motors that use the same bolt hole pattern.
This is the standard aluminum cross mount that comes in the hardware kit with all BadAss 23mm motors. The four motor mounting holes are on a standard 16mm x 19mm mounting pattern, so in addition to fitting the BadAss 23mm motors, they will also fit a variety of other 22mm to 23mm motors that use the same bolt hole pattern. Also included with the cross mount is a set of four M3 x 6mm flathead machine screws for installing the mount onto the motor. An innovative feature of the BadAss cross mounts is the way they attach to your model’s firewall. Instead of using a set of four holes with fixed spacing on the outer rim of the cross mount, the BadAss cross mounts use a set of four elongated, oval shaped holes that will fit a range of screw spacing from 34mm up to 37mm. This allows the motor mount to fit a wider range of applications and is especially useful when installing a motor onto an ARF kit that comes with blind nuts already installed in the firewall.