Cobra 80A FPV Wing ESC with 6A Switching BEC
Cobra Speed Controllers are designed with a relentless pursuit of exceptional product quality. These speed controllers are the perfect compliment to a Cobra Brushless motor, and they will also work with virtually any other brushless motor on the market as well. Cobra Speed Controllers are built from the best components available to provide the user with long life and trouble-free operation.
The new Cobra FPV Wing Series ESC's are designed for the new FPV Racing Wings that utilize high-RPM motors. These ESC's feature the latest BL-Heli firmware that stays in sync with motors running up over 40,000 RPM.
The 80 Amp Wing model ESC includes a built-in 5.5 volt switching BEC rated for 6 amps of current to handle the power needs of the larger digital servos.
The input leads on the speed controller are pre-tinned, and ready to solder on the battery connector of your choice. The output leads do not include female bullet connectors since you may need to install 3.5mm or 4mm sized bullets to match your motor.
| Weight (With Ouput Connectors) | 64.2 grams (2.26 oz) |
| Max Continuous Current | 80 Amps |
| Burst Current rating (15s) | 100 Amps |
| Operating Voltage Range | 6 to 26 Volts |
| Number of Li-Po cells | 2 to 6 cells |
| Number of Ni-XX cells | 6 to 20 cells |
| Number of Li-Fe cells | 2 to 7 cells |
| Switching BEC Output | 6 amps @ 5.5 Volts |
| ESC Size (Inc. Caps, in mm) | 68 x 33 x 14 |
| ESC Size (Inc. Caps, in inches) | 2.68 x 1.30 x 0.55 |
For more information about this product and the rest of the Cobra Motors product line, please check out the Cobra Brushless Motors web site.