The bearings used in Cobra Motors are designed to run smoothly for a long time, but occasionally, in a crash, you can damage them. For those occasions, we offer replacement bearings for all of the Cobra Motors.
This kit contains a set of 3 original equipment replacement bearings for the Cobra C-2826, C-3515, C-3520 and C-3525 motors. The two inner bearings measure 5mm ID x 11mm OD x 5mm thick, and the outer bearing measures 5mm ID x 16mm OD x 5mm thick. These Bearings are exact replacements for the bearings that come in the Cobra motors.
The bearings in a brushless motor are a slight press fit into the motor housing, so they need to be removed and installed with the proper tools. When removing the old bearings, you will need to push them out with an arbor press. Care must me taken to ensure that you do not damage the motor windings when pressing out the old bearings.
When putting the new bearings back into your motor, you must only push on the outer race of the bearing. Never apply pressure to the inner race of a bearing! This can create small dents in the bearing balls or ball races, making the bearing run rough and lead to premature failure.
If you are unsure about how to change the bearings in a motor, you can watch the How To Change the Bearings in a Motor
video that we have on YouTube.
For more information about this product and the rest of the Cobra Motors product line, please check out the Cobra Brushless Motors web site.