Cobra C-2204/32 Brushless Motor, Kv=1960

Out of stock
Cobra C-2204/32 Brushless Airplane Motor

More Views

This motor is specifically for Airplanes. If you are looking for the Multirotor version of this motor, click here.

Cobra Brushless Motors offer performance and value for Sport Flyers and Competition pilots alike. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all sides, with separate compartments to protect the motor and accessory pack.

The Cobra 2204 series motors have a 3.0mm shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Since these motors are typically soldered directly to the speed controller to save weight, the 2204 motors come without bullet connectors and feature pre-tinned motor leads. These motors also have a cross mount built right into the back plate for easy installation on your model.

Included with every Cobra 2204 Series Motor is a complete accessory package which contains the following items:

● Four M2x8mm Motor Mount Screws
● O-ring prop adapter with 2 screws
● 20mm dia. x 2mm O-Ring

The O-Ring prop adapter is a reversible unit with a 5.5mm centering ring on one side to fit GWS Slow-Fly props, and a 7.0mm centering ring on the other side to fit GWS DD series props. With the proper center hole adapter ring, GWS Slow-Fly props and other brands will also fit perfectly on the prop adapter.

Click here for the Cobra C-2204/32 Propeller Data Chart

Cobra 2204/32 Motor Specifications
 Stator Diameter 22.0 mm (0.866 in)
 Stator Thickness 4.0 mm (0.157 in)
 Number of Stator Slots 12
 Number of Magnet Poles 14
 Motor Wind 32 Turn Delta
 Motor Kv Value 1960 RPM per Volt
 No Load Current (Io) 0.58 Amps @ 8 Volts
 Motor Resistance (Rm) per Phase 0.153 Ohms
 Motor Resistance (Rm) Phase to Phase 0.102 Ohms
 Maximum Continuous Current 12 Amps
 Max Continuous Power (2-cell Li-Po) 90 Watts
 Max Continuous Power (3-cell Li-Po) 130 Watts
 Motor Weight 22.5 grams (0.79 oz.)
 Outside Diameter 27.0 mm (1.063 in.)
 Shaft Diameter 3.00 mm (0.118 in.)
 Motor Body Length 14.2 mm (0.559 in.)
 Overall Shaft Length 21.8 mm (0.858 in.)
 Motor Timing 5-10 degrees
 PWM Frequency 8 KHz

Front View

Items Included in Hardware Package

Cobra Motor Packaging

Package Interior

For more information about this product and the rest of the Cobra Motors product line, please check out the Cobra Brushless Motors web site.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account