Cobra C-2826-EF1-SS Brushless Motor, Kv=1200
Cobra C-2826-EF1-SS Brushless Motor, Kv=1200
Cobra Brushless Motors offer performance and value for Sport Flyers and Competition pilots alike. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all six sides of the box, with 3 separate compartments to protect the motor, accessory pack and cross mount.
The Cobra 2826 series motors have a 5mm shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The internal bearing measures 11mm x 5mm x 5mm and the outer bearing measures a massive 16mm x 5mm x 5mm! The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Also included on the motor are ultra-flexible motor leads with high-temp silicone rubber insulation and 3.5mm bullet connectors already installed.
The Cobra C-2826-EF1 motor was developed for Electric Pylon Racing, and has been accepted as a certified motor by the EF1 Competition racing committee. This specific model has a stock motor shaft in it that sticks out the back of the motor for pilots that want to reverse mount the motor and use a collet style prop adapter or spinner. This also allows you to mount the motor in a pusher configuration on an FPV Racing Wing type aircraft.
The Kv value of this motor is optimized for use with an APC 8x8-E prop running on a 4-cell Li-Po battery pack, as stated in the EF1 Racing Rules.
Included with every Cobra 2826 Series Motor is a complete accessory package which contains the following items:
● Heavy Duty 3mm Thick Cross Style Motor Mount
● Four M3x6mm Motor Mount Screws
● Bolt-On style threaded prop adapter with 4 screws
● Three female 3.5mm bullet connectors
● Three pieces of heat-shrink tubing
Click here for the Cobra C-2826-EF1 Propeller Data Chart
Cobra 2826/8 Motor Specifications | |
---|---|
Stator Diameter | 28.0 mm (1.102 in) |
Stator Thickness | 26.0 mm (1.024 in) |
Number of Stator Slots | 12 |
Number of Magnet Poles | 14 |
Motor Wind | 7 Turn Delta |
Motor Kv Value | 1200 RPM per Volt |
No Load Current (Io) | 3.23 Amps @ 15 Volts |
Motor Resistance (Rm) per Phase | 0.033 Ohms |
Motor Resistance (Rm) Phase to Phase | 0.022 Ohms |
Maximum Continuous Current | 68 Amps |
Max Continuous Power (3-cell Li-Po) | 750 Watts |
Max Continuous Power (4-cell Li-Po) | 1020 Watts |
Motor Weight | 176 grams (6.21 oz.) |
Outside Diameter | 35.0 mm (1.378 in.) |
Shaft Diameter | 5.00 mm (0.197 in.) |
Motor Body Length | 46.0 mm (1.811 in.) |
Overall Shaft Length | 66.0 mm (2.047 in.) |
Motor Timing | 5-15 degrees |
PWM Frequency | 8 KHz |
PROPELLER TEST DATA
With APC 8x6-E prop on 4 Li-Po cells:
Volts - 15.0
Amps - 54.8
Watts - 822
RPM - 14,700
Thrust - 1904 grams, 67.2 ounces
Pitch Speed - 84 MPH
With APC 8x8-E Prop on 4 Li-Po cells
Volts - 15.0
Amps - 67.3
Watts - 1010
RPM - 13,960
Thrust - 1750 grams, 61.7 ounces
Pitch Speed - 106 MPH
For more information about this product and the rest of the Cobra Motors product line, please check out the Cobra Brushless Motors web site.