Cobra CPL-2205-2300 Champion Lite Series Multirotor Motor, Kv=2300

Out of stock
Cobra CPL-2205-2300 Champion Lite Series Motor

More Views

The Cobra Champion Lite Series motors follow on the heels of the popular Champion Series motor. A completely new design that increases cooling and efficiency while reducing weight, these motors provide the ultimate power for your smaller FPV Racing Quads. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Since these motors are typically soldered directly to the speed controller to save weight, the CPL-2205 motors come without bullet connectors ,and feature extended pre-tinned motor leads that are 3-3/4 inches (95mm) long. These motors also have 3mm threaded holes in a 16x19mm pattern on the back plate for easy installation on your model.

The CPL-2205 series motors feature an integrated 5mm threaded motor shaft which eliminates the chance of having a prop adapter spin off in flight. The included nylon insert prop nut, which has an integrated prop washer, provides a solid attachment for your propellers that will not loosen up and slip during use.

Also included with every Cobra CPL-2205 Series Motor is a complete accessory pack, which includes everything you need to securely mount the motor to your quad frame, and to mount the prop to the motor.

The hardware kit contains the following items:

● Four M3x6mm Socket Head Motor Mount Screws
● One 2mm Allen Key hex wrench
● Four M3 Flat Washers
● One Locking Prop Nut with Nylon Insert

Click here for the Cobra CPL-2205-2300 Propeller Data Chart

Cobra CPL-2205/2300 Motor Specifications
 Stator Diameter 22.0 mm (0.866 in)
 Stator Thickness 5.0 mm (0.197 in)
 Number of Stator Slots 12
 Number of Magnet Poles 14
 Motor Wind 26 Turn Delta
 Motor Kv Value 2300 RPM per Volt
 No Load Current (Io) 0.60 Amps @ 10 Volts
 Motor Resistance (Rm) per Phase 0.120 Ohms
 Motor Resistance (Rm) Phase to Phase 0.080 Ohms
 Maximum Continuous Current 22 Amps
 Max Continuous Power (3-cell Li-Po) 245 Watts
 Max Continuous Power (4-cell Li-Po) 325 Watts
 Motor Weight (With leads) 26.2 grams (0.92 oz.)
 Outside Diameter 27.0 mm (1.063 in.)
 Motor Shaft Diameter 3.00 mm (0.118 in.)
 Prop Shaft Diameter 5.00 mm (0.197 in.)
 Motor Body Length (Mount to prop face) 18.2 mm (0.717 in.)
 Overall Shaft Length 32.7 mm (1.287 in.)
 Motor Timing 5-10 degrees
 PWM Frequency 8 KHz

*Please observe the motor specifications properly. This will determine the correct size ESC required for proper operation*
*Motors do not come with replacement parts!*
*Motors that have failed\burned running on an incorrect ESC size will void warranty*

For more information about this product and the rest of the Cobra Motors product line, please check out the Cobra Brushless Motors web site.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account