We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Hitec HS-485HB Deluxe Ball Bearing, Resin Gear, Analog Sport Servo
$28.99
In stock
SKU
HIT-HS-485HB
Overview
HS-485HB Deluxe Ball Bearing, Resin Gear, Analog Sport Servo
The HS-485HB updates the very popular HS-475HB by adding more torque and greater speed. With its top ball bearing, heavy duty, high impact Karbonite™ gears and high performance circuitry, the HS-485HB offers lots of torque and features excellent centering and resolution.
- Applications: Heli's and Aircraft up to 72” or up to 12lbs when using just one servo per control surface.
- Note: Be aware that high vibration gas (not glow) engines combined with large contol surfaces and large thows (3D models) can put undue strain on the gears. Metal geared servos are recommended for these applications even if under 12lbs.
- Warning: Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail.
Features
- Top Selling Heavy Duty Standard Servo
- High Impact Karbonite Gears
- Top Ball Bearings
- Excellent Centering and Resolution
| Hitec HS-485HB Specifications |
|
|---|---|
| Performance Specifications | |
| Operating Voltage Range (Volts DC) | 4.8 to 6.0 Volts |
| Speed (For 60 Degrees of Rotation) | 0.22 - 0.18 Sec. |
| Maximum Torque (Ounce-Inches) | 67 - 83 |
| Maximum Torque (Kilogram-Centimeters) | 4.8 - 6.0 |
| Current Draw at Idle | 10 mA |
| No-Load Operating Current Draw | 200 mA |
| Stall Current Draw | 1200 mA |
| Dead Band Width | 3 uS |
| Physical Specifications | |
| Dimensions (Inches) | 1.57 x 0.78 x 1.49 (L x W x H) |
| Dimensions (Millimeters) | 39.8 x 19.8 x 38.0 (L x W x H) |
| Weight (Ounces) | 1.59 |
| Weight (Grams) | 45.0 |
| Circuit Type | HT7003 Analog SMT |
| Motor Type | 3-Pole Metal Brush Ferrite |
| Gear Material | Karbonite |
| Bearing Type | Top Ball Bearing |
| Output Shaft | 24 Spline |
| Case Material | Plastic |
| Dust and Water Resistant | No |
| Wire Lead Gauge (AWG) / Strand Count | 25 / 40 |
Write Your Own Review