Based off a 1980's classic, originally offered by World Engines.

The Robinhood is a fun-scale version of the Curtiss Robin built back in the 1920's Originally marketed through World Engines, this model retains all the good, clean looks of the original and retains all the great flying characteristics that make a good sport airplane.

In the air, the Robinhood 25 is a true barnstormer. Don't mistake this for a 3-D hovering machine and resist the urge to overpower it. The Robinhood 25 is at it's best when cruising on a lazy afternoon or performing some gentle aerobatics. Also, no problems with mown-grass runway takeoffs and landings.

If you want to go truly "old school", it can be built for simple 3-channel control (rudder, elevator and throttle). For even more control, the included ailerons can be made fully functional (4 channel control).

The Robinhood can be powered with either an electric or glow powerplant. We've designed the fuselage with a built-in hatch so you have quick access to either your batteries or fuel tank.

The wing is removable via 2 bolts from the top of the fuselage. Struts were a necessity on the full-scale Curtiss Robin, but are optional for the Robinhood 25. Instructions are included on how to implement them if you'd like to give your Robinhood 25 a touch of Old-School elegance.

Our Robinhood 25 was independently reviewed by MBMrc. Check out the video report below...

	Premium USA Hardware Included in each Old School Model Works kit is a premium hardware package. We only source our hardware from brand-name, USA manufacturers to guarantee the best quality.
	3 or 4 channels You decide - go true "old-school" with 3 channel control, or opt for functional ailerons (4 channel).
	WEB-LOCK Construction There's nothing else like it. Build our wings, straight and true - with a minimum amount of fuss.
	Bolt on wing Staying true to the original, we have replicated the original bolt-on system for the wing.
	Front hatch Held in with your choice of screws or magnets, this gives you easy access to batteries or fuel.
	Optional Wing Struts You choose. Create a set for scale looks, or fly without them for a streamlined change of pace.
	Design your color scheme Download this sheet to design your Robinhood 25's color scheme.
	Want to see more? Clickthe "My Build" button to bring up a Flickr photo album of our customer's Robinhood25 builds.

Specifications:

• Wingspan: 51 inches
• Wing Area: 400 sq inches
• Length (airframe only): 33 inches
• Weight: 3-3.5 pounds

Radio:

• 3 or 4 channel system
• 2 40-70 in./oz. servos for elevator and rudder
• 2 40-70 in./oz. servos for ailerons if making a 4 channel model
• 1 40-70 in./oz. servo for throttle (if using a glow engine)

Power:

• Electric (.25 equivalent brushless motor, 60 amp ESC, 3S LiPo)
• Glow (.20-.25 engine, 4-6 ounce tank, fuel tubing)

Additional items needed to complete the Robinhood 25 kit:

• Propeller
• Engine/Motor mount & mounting hardware“Y” servo harness (for ailerons)
• Pushrods (two 5” for ailerons, two 24” for elevator & rudder, one 12” for throttle if glow powered)
• Clevises for the pushrods (8 if electric, 10 if glow).
• 2 - 3” diameter wheels
• 1 - tailwheel assembly
• Covering

Recommended Power Systems

Cobra

C-2814/12 1390Kv Motor, C-40A-ESC, APC 9x4.5 or 10x5 Prop on 3S 2600mah LiPo Battery

APC 9x4.5 Prop = 11.1v, 28.9.A, 321 watts, 11,941 RPM, 52oz Thrust, 51mph Speed
APC 10x5 Prop = 11.1v, 39.3A, 436 watts, 10,967 RPM, 61oz Thrust, 52mph Speed

Tempest

Tem-2814-1400Kv Motor, TEM-ESC-40A-6S ESC, APC 9x4,5 or 10x5 Prop on 3S 2600mah LiPo Battery

APC 9x4.5 Prop = 11.1v, 35.8A, 397 watts, 12,610 RPM, 59oz Thrust, 54mph Speed
APC 10x5 Prop = 11.1v, 49.6A, 550 watts, 11,711 RPM, 68oz Thrust, 55mph Speed

BadAss

BA-2814-1300Kv Motor, BadAss Rebel V2 60A ESC, APC 9x4.5 or 10x5 Prop on 3S 3300mah LiPo Battery

APC 9x4.5 Prop = 11.1v, 33.A, 338 watts, 12,370 RPM, 55oz Thrust, 53mph Speed
APC 10x5 Prop = 11.1v, 42.2A, 467 watts, 11,528 RPM, 67oz Thrust, 55mph Speed

Want some ideas on how to finish your Robinhood 25?

Click the image below for some customer build photos.

Please Note:  All of the Old School Model Works Kits on our website have a $5 Oversize Package surcharge included in the price shown.  This will cover the additional shipping cost while still allowing you to choose our economical Flat Rate Shipping option.  This makes the delivered cost of the kit the same as ordering it directly Old School Model Works. 

We are sorry, but due to the size of the kits and high International shipping costs, we cannot ship them outside of the United States.