Scorpion HK-5020 Motor Shaft Kit

Write A Review

Scorpion HK-5020 Motor Shaft Kit

In Stock

Regular Price: $42.99

Special Price $12.89

Description

The Scorpion HK-5020 motors are built with 10mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a "Less than Perfect" landing, you may bend or break one. For these occasions, we offer factory replacement shafts for all the HK-5020 series Scorpion Helicopter Motors.

The shaft for the HK-5020 series motors measures 10mm in diameter, and is 96.7mm long. The pinion end of this shaft is ground down to 6mm to allow the user to install 6mm pinion gears. The tapered part of the shaft extends 43mm from the mounting face of the motor. The shaft kit will also fit other brushless motors that require a 10mm shaft of this length. The shafts can be cut shorter with a Dremel tool and a cut-off wheel if necessary to fit other motors.

Note: the shafts in the Scorpion motors are a press fit into the aluminum front housing. The shafts will not just slide out when the setscrews are removed. They need to be pressed out in a bearing press, or in a drill press, with the front housing of the motor supported in a block of wood to prevent warping the front housing. Never tap the shaft out with a hammer. The shock induced can bend the motor parts and knock the glue joints loose on the motor magnets.
SALE
Scorpion HK-5020 Motor Shaft Kit

Write A Review

Only registered users can write reviews. Please log in or register

Customer Reviews

This product has not been reviewed. You could write the first review.