Tempest Switching BEC, 3-12S 20A

$19.99
In stock
SKU
TEM-SBEC-20A
Overview

The Tempest SBEC’s feature high efficiency switching voltage regulators that step the voltage from your motor battery down to a safe level to power your Radio Receiver, Servos or other RC related gear.

More Views

The Tempest SBEC’s feature high efficiency switching voltage regulators that step the voltage from your motor battery down to a safe level to power your Radio Receiver, Servos or other RC related gear.

The Tempest 20-Amp Peak SBEC will accept inputs from 6 to 50.4 volts (2 to 12 LiPo cells) and provides up to 10 Amps of continuous current, with the ability to handle up to 20 Amps of peak current for up to 2 seconds.  The output of this SBEC is user selectable, with a programming jumper, to 4 different outputs:  5.0 volts, 6.0 volts, 7.4 volts or 12.0 volts.  The input voltage must always be higher than the output voltage for this SBEC to operate properly.  For the 5.0 volt and 6.0 volt outputs the input must be a 2-cell Li-Po or higher.  For the 7.4 volt output, the input must be a 3-cell LiPo or higher, and for the 12.0 volt output, the input must be a 4-cell LiPo or higher.

Specifications

Parameter 20A-SBEC
Continuous  Current / Burst Rating (10 Sec) 10A / 20A
Voltage Range 6 - 50v
LiPo Cell Range 2-12
Ni-XX Cell Range 6-36
BEC Type Switching
BEC Output 5v, 6v, 7.4v, or 12v
Weight Grams / Ounces 44,6g / 1.57oz
Dimensions mm (L x W x H) 70mm x 26mm x 22mm
Dimensions Inches (L x W x H) 2.76" x 1.02" x 0.87"
Battery Lead Gauge 18 AWG
Bat. Lead Length mm / inches 200mm / 7.87"
Servo Lead Output Gauge Dual 20 AWG
Servo Lead Output Length mm / inches 260mm / 10.24"
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account